TAMPOPRINT AG, Tampon, silicone material, accessories

Accessories Tampon - Silicone material

silicone material – four to choice
	Silicone material 03 Art. Code 08 = red brown silicone Antistatic: very good Mechanical capacity: very good, considerably better than silicone material 02 Main use: all purpose, also suitable for UV tampon printing inks and half tone clichés. Swelling behaviour: good Suitable for storage: about one year (beyond = lesser hardness i.e. the tampon becomes softer) Available in hardness (Shore-A): 1, 3, 6, 12, 18 Silicone material "03ST" - super dry (PDF) Silicone material "03H" - hightech (PDF) Tampon printing machine with less force of pressure needed. FDA - Conformity (PDF)	Silicone material 04 Art. Code 07 = light blue silicone Antistatic: optimal, Hundred-fold less electrostatic charge than silicone material 03. Mechanical capacity: very good, equal to silicone material 03 Main use: universal Swelling behaviour: good Suitable for storage: about one year (beyond = lesser hardness i.e. the tampon becomes softer) Available in hardness (Shore-A): 1, 3, 6, 12, 18 Note: most favourable silicone material with excellent price-performance ratio! Silicone material "04ST" - super dry (PDF)
Industrial manufacturing according to binding quality standards at TAMPOPRINT AG. The material properties of silicone rubber are very suitable for the manufacturing of printing tampons. The special contrary material characteristics, namely the pick up of the tampon printing ink from the cliché and the subsequent application onto the printing part can be attributed to the extraordinary separation qualities. Especially noteworthy are its separation qualities of the surface against inorganic and organic materials, as well as its permanent elasticity, its high moulding accuracy, as well as its chemical resistance against light acid and alkaline.	Silicone material 02 Art. Code 06 = white silicone Antistatic: good Mechanical capacity: good Main use: optical industry, easy to clean, finest printing images with line graphics are transmittable Swelling behaviour: very good Suitable for storage: max. 3 month (beyond = lesser hardness i.e. the tampon becomes softer) Deliverable in hardness (Shore-A): 6, 12, 18	Silicone material 01 Art. Code 05 = yellow silicone Antistatic: good Mechanical capacity: good Main use: suitable for special applications only Swelling behaviour: good Suitable for storage: max. 3 month (beyond = lesser hardness i.e. the tampon is softer) Deliverable in hardness (Shore-A): 1, 3, 6, 12
Silicone material	Antistatic properties	Mechanical capacity:
The quality of the silicone material from which the tampons are made, determines the various properties of the tampons.	The antistatic properties show how well the silicone material is resistant to electrostatic charge. Anti static tampons can eliminate smudgy ink or ink pulling strands.	The tampon can break down during rolling over sharp edges. Depending on the silicone material this can happen sooner or later. Swelling behaviour during storage: Please see crash test.
Storing characteristics	Swelling behaviour	Super-dry "ST" version
Storing characteristics show a period of time after which a reduction of hardness (Shore-A) occurs and the surface of the tampon becomes brittle.	The swelling behaviour depends on the ink type or thinner type being used. All tampon materials are subjected to swelling because they absorb thinner. TIP: The lower the tendency is to swell, the better the transmission of the print image.	Silicone oil is encapsulated - no silicone oil on your printing part. Ideal for coating removal via laser - after printing of lacquer by tampon printing. No problems with colour gradient when printing parts are lacquered subsequently. Transfer of water-based emulsions/inks in tampon printing process possible. Almost residue-free tampon printing, (e.g. on electronic components).

TAMPOPRINT^® AG , Lingwiesenstrasse 1, 70825 Korntal-Münchingen, Germany, phone: +49 7150 928-0, fax: +49 7150 928-400, info@tampoprint.de
Chairman: Wilfried Philipp, Managing director: Albrecht Schrayßhuen, Chief Executive Director: Willy Baumann, VAT Ident. No. DE811243767, Registy office AG HRB 206245